Cessna 120 / 140 / 150 / 152
SKU:
P/N: RCS-300-1 or (R1180001-0)
Cessna Sliding Arm Side Mount System
Compatible with most Cessna 120, 140, 150, & 152s as well as most pre 1980 model 172 to 207s with factory side mounted visors, or no visors.
Cessna 120 / 140 / 150 / 152
Cessna 150 & 152 models: All Cessna 150/152 models that were originally equipped with factory visors used the early “center mount” configuration. Visors are mounted on a bar located in the overhead center console. In this configuration, the Rosen visor does not install on the original bar mount. The factory bar mount is removed and rivnuts are installed outboard on the bottom of spar to create new side mounting locations.
Many 150/152s were delivered without factory visors. Again, for these models, rivnuts are used to create side mounting locations. In either case, the correct Rosen part number to order is RCS-300-1 (R1180001-0)
Installation: Our kit comes complete with all mounting hardware, installation instructions and STC.
Approximate lens size: 12” x 10”
If you need a replacement lens for your system please reference:
RCS-200-1 (R1180301-001) Cessna Standard Replacement Lens
The standard 2 axis visor system will move/adjust in directions similar to a car visor. It will rotate upward to stow, swing to the side window, and slide out on the arm. The 3rd axis gives you one additional pivot axis in a downward arc towards your lap. This is useful when more window coverage from the sun is required, and also needed in float planes to move the visors around the V brace.
Note: Does not fit models 160, 162, 165, 187, 188, 190, 195. We do not have a replacement visor system for these models. For the 177, see RCS-300-5 system for the Cardinal.
You can place an order at the link above, or feel free to call or email Rosen's sales team at 800-284-7677 or [email protected] Office hours Monday through Friday 7am-4pm Pacific Time Zone. We are located in Eugene, Oregon USA
Many 150/152s were delivered without factory visors. Again, for these models, rivnuts are used to create side mounting locations. In either case, the correct Rosen part number to order is RCS-300-1 (R1180001-0)
Installation: Our kit comes complete with all mounting hardware, installation instructions and STC.
Approximate lens size: 12” x 10”
If you need a replacement lens for your system please reference:
RCS-200-1 (R1180301-001) Cessna Standard Replacement Lens
- Optical quality lens material
- Protects from 99.9% of UV rays (A/B)
- Glare and fatigue reduction with complete cockpit coverage
- Stable and easy adjustments
- A secure stowing position
- Superior materials and construction
The standard 2 axis visor system will move/adjust in directions similar to a car visor. It will rotate upward to stow, swing to the side window, and slide out on the arm. The 3rd axis gives you one additional pivot axis in a downward arc towards your lap. This is useful when more window coverage from the sun is required, and also needed in float planes to move the visors around the V brace.
Note: Does not fit models 160, 162, 165, 187, 188, 190, 195. We do not have a replacement visor system for these models. For the 177, see RCS-300-5 system for the Cardinal.
You can place an order at the link above, or feel free to call or email Rosen's sales team at 800-284-7677 or [email protected] Office hours Monday through Friday 7am-4pm Pacific Time Zone. We are located in Eugene, Oregon USA